Duex Industrial Systems

Wood Dryer cum Seasoning-
In Wood dryer 3 step drying is done i.e.Stage 1- Pre step- It is done by means of Heat Pump, it also acts asDehumidifier to some extent. This stage also required to heat-up the coolchamber.Stage 2- Post step- It is done by means of Heat condenserStage 3- High static air- It is done with high static blower to take awaymoisture from wood stripesChamber has circulation blower/s to create air turbulence in Chamber andthus dry air reaches to all sections of material kept for drying.Supply and Return ducts are used for proper distribution and suction of air.When Hot and Dehumidified air is circulated over product again and again,product releases moisture, also it depends on characteristic of product andresults may vary from 3 to 6 days depending on % moisture and wood type.

Wood drying cum seasoning is done with specialized optimized DUEX system for wood bars upto 4-6 inches.
It is noiseless, pollutionless system and operated totally on electricity. It comes in sizes 100 to 5000 CFT wood drying

Additional Information:

• Production Capacity: 20
• Packaging Details: Plastic wrap or Export wooden packing

We are leading manufacturer and exporter of Wood Dryer and our product is made up of good quality.

Among the many interesting topics in the field of Wood Dryer Science and Technology is a fascinating story about research and development on drying wood products with high-frequency electric current.

 

Product details:

• Historically, it can be traced back over decades. Heat transfer to and evaporation of moisture from wood may be accomplished with high frequency current depending on its dielectric properties.
• Because wood is generally heterogeneous, these properties vary not only with the frequency of the current and the field orientation, but also with the moisture content, temperature, and density of wood.
• Considering these parameters and the specific heat of the material, estimates of power absorption can be made.

RfV drying technology constitutes a combination of two special methods:

• Heating by high frequency current and drying in vacuum where the boiling point of water is decreased with decreasing pressure. 
• Consequently, the movement of water through wood increases leading to shorter drying times than can be achieved at atmospheric pressure.
• The intensity of the heating depends directly on the moisture content of the wood and the electric field, while the moisture movement depends on the permeability of the wood and the internal pressure gradient. 
• At radio frequencies, the penetration depth influences the dimensions of the electric field that is of the order of meters, thus, making possible the heating of entire stacks of lumber.

Wood Dryer cum Seasoning-
In Wood dryer 3 step drying is done i.e.Stage 1- Pre step- It is done by means of Heat Pump, it also acts asDehumidifier to some extent. This stage also required to heat-up the coolchamber.Stage 2- Post step- It is done by means of Heat condenserStage 3- High static air- It is done with high static blower to take awaymoisture from wood stripesChamber has circulation blower/s to create air turbulence in Chamber andthus dry air reaches to all sections of material kept for drying.Supply and Return ducts are used for proper distribution and suction of air.When Hot and Dehumidified air is circulated over product again and again,product releases moisture, also it depends on characteristic of product andresults may vary from 3 to 6 days depending on % moisture and wood type.